Fujifilm firmware update for its popular devices. It will provide up to 33 modifications, many of which you'll like.
The first update will be available in late March, and the second at the end of May 2017. They will reflect the users' expectations regarding the improvement of the properties of equipment maintenance, as well as enrich it with new features. Application of the new firmware adds new features such as the "Voice Memo" (Voice Memo) and "Copyright Information" (Copyright information), and above all, greatly improves the performance of AF, shootings and services viewfinder.
X-T2 version 2.00 and X-Pro2 version 3.00 – intended to introduce at the end of March 2017.
1. Shooting with record RAW and bracketing functions and advanced Filters update allows you to use the RAW format not only for shooting at AEB, but also with other bracketing modes (ISO, Dynamic Range, White Balance, Film Simulation) and Advanced modes filters. 2. The extension of the ISO value ISO125 and 160 update introduces options ISO125 and ISO160 expanded the scope of the ISO value offered by the camera. 3. Programmable long exposure times up to 15 minutes long exposure mode T now allows irradiation of frames up to 30 seconds. Introduced update will allow users to extend the time to 15 minutes. 4. Turn on / off regulation shutter speed in increments of 1/3 (only X-T2 – X-Pro2 already has this possibility) Update allows you to disable the control dial, which changes the shutter speed of 1/3 to the same avoid involuntary changes in value. 5. Adjust the ISO to the full extent using the control knob (only X-T2) After the update, you can set the option "A" ISO sensitivity value of the "Command" to adjust the ISO sensitivity to the full extent, including the extended values, using front Steering knobs. 6. The "AUTO" added to the longest permissible shutter speed at ISO Auto update adds the option AUTO longest allowable shutter speed at ISO Auto, enabling the camera to automatically determine the longest possible shutter speed depending on the focal length of the lens attached. 7. Faster "AF with face detection" update allows you to use the SA-based phase detection, to ensure faster AF with face detection. 8. Improved identification of areas of acute AF-C Update reduces the question of "hunting for focus" AF-C making it easier to track the subject. 9. Adding a smaller focus point single-point AF The update adds a smaller focus point size for single mode, AF point, making a total of six sizes will be available point. The new, smaller spot size facilitates extremely precise focusing. 10. Adding the "Display AF Point" (only X-Pro2 – a function already available in the X-T2) With the update, you can activate the continuous display AF points when measuring the Zone AF and Wide / tracking AF, which makes it easier to track the subject. 11. Add the "Settings AF-C's" (only X-Pro2 – a function already available in the X-T2) The update adds the option "Settings AF-C's" ( "AF-C Custom Setting"), which allows you to define the characteristics of the track focus. You can choose from five preset settings according to the type of movement of the subject. 12. The addition of the AF mode switch for vertical / horizontal layout of the frame (only X-T2) update allows separate setting of AF and AF point for horizontal and vertical alignment of the frame. 13. Change the position of the focus frame when you zoom the update allows you to move the position of the focus frame when the zoom. This applies to AF-S with a single point of focus and manual focus mode. 14. Activate Sensor eye when shooting (only X-T2) update allows the use of sensor eye during filming, followed by the automatic switching between the electronic viewfinder (EVF) and LCD screen of the camera. 15. Changing the ISO sensitivity when shooting (only X-T2) Update allows you to change the ISO setting when shooting. 16. Retry auto focus while shooting With this update, press while filming the shutter button halfway or pressing the button assigned to the "AF-ON" makes again automatically sets the focus. 17. Histogram display of live images in the video mode (only X-T2) Entered update will histogram display of live images in movie mode. 18. Optimize the input level from an external microphone (only X-T2) update optimizes the input level from an external microphone (lower limit fixed from -12dB to 20dB) to reduce noise when connected an external microphone preamplifier. 19. In preview mode added option "Eye Sensor + LCD Display Picture" Update introduces in preview mode to "Eye Sensor + LCD Display Picture", which allows you to shoot with the viewfinder and check the images on the LCD screen, as is done in digital SLR. 20. The shorter the delay time of the image displayed in the electronic viewfinder / EVF / (only X-Pro2 – model X-T2 is available now) update reduces the delay time of the image displayed in the electronic viewfinder / EVF / when using the AF-C, so you do not miss any shots. 21. Fixed display in "Dual" (only X-T2) Updating make a small window in Dual mode will remain on even after you press the shutter button halfway. 22. Automatic vertical user interface for LCD (only X-T2) Updating make when holding the camera in vertical (portrait) automatically in the same orientation will be displayed user interface on the LCD screen. 23. The names of user settings update will allow you to assign names to the selected user settings 1 -7 (Custom Settings 1 – 7). 24. Copyright information in the EXIF data update will register the previous name of the photographer and the name of the copyright holder, so that the information was added with each shot to the EXIF data. 25. The voice memo After the update you will be able to register in Playback mode 30-second voice memo. 26. Extended Exposure Bracketing update extends the current bracketing functions for exposure of 9 frames and change +/- 2EV to 9 frames with the change of +/- 3EV. 27. An additional option mode "Photo without a" update will enable the off mode "Photo without a card," which makes the camera can not take pictures if it is not placed in the SD card.
X-T2 version 2.10 and X-Pro2 version 3.10 – available at the end of May 2017
28. Support the computer functions tethering via Wi-Fi (only X-T2) update adds support for the computer function tethering via Wi-Fi. 29. Adding AF "All" (only X-T2) update will introduce the "All" to the AF mode, so you can select the AF area size and focus using the control dial. 30. Function extension for "Shutter AF" and "Shutter AE" (only X-T2) By upgrading you can select different settings for AF-S and AF-C mode "Shutter AF" and options for AF-S / MF and AF-C mode "Shutter AE." 31. Adding the option "-6" and "-7" to the brightness levels of the electronic viewfinder / EVF / Added options are "-6" and "-7" to the brightness levels of the electronic viewfinder / EVF / to low light excessive brightness of the electronic viewfinder not distract the photographer. 32. Switch between the main and secondary displays in the display mode "Dual" (only X-T2) update will allow you to switch between the main and secondary displays in the display mode "Dual". 33. The assignment of functions to the rear control dial With this upgrade, you can define a function that is activated when you press the rear control dial.